Bytemon is a network and resource performance monitoring application, intended to give administrators real-time information about the condition of networks and servers, while at the same time providing historical data and charts for reporting, resource planning and other administrative purposes.
Bytemon can be used to monitor resource availability and usage as well as performance data of all kinds, such as network performance parameters (bandwidth usage, protocols usage), system performance parameters (CPU and memory usage), the availability of network resources, and the network latency of access to remote devices and services.

Bytemon lets you monitor the availability, current status and usage of key resources in your network:
* Traffic Monitoring (SNMP): Bandwidth and Usage Monitoring of your networking equipment (hubs, routers, switches)
* Network Protocol Usage Analysis (Packet Sniffing): Packet filtering allows you to analyze network traffic by protocols, source/destination IP etc.
* Performance Monitoring (WMI) for servers and any networked devices (network printers, network storage)
* Availability and Latency Monitoring of remote devices and servers like mail servers or web servers

Bytemon allows you to quickly and easily set up and run a distributed monitoring system for networks of all sizes. With just a few mouse clicks you can analyze the amount of data flowing through routers and leased lines, monitor CPU utilization, or check disk space usage.

The Bytemon Windows service runs on one or more computers in your network for 24 hours a day and collects information on network and resource usage. With the Bytemon client, the collected data can be visualized and analyzed in an easy and flexible way. With Bytemon's thumbnail charts, you can see the status of remote devices at a glance, with only a minimal screen footprint.

• Bytemon Network Monitor 2.1.1.3
  ByteMon is a MRTG-like network monitoring solution (SNMP, WMI, Packet Filtering), giving administrators real-time information about the condition of networks and servers, while at...

• Server Health Notifier 1.4
  Powerful, simple and easily configured system monitor application for notifying about the system resources problems of a local or remote computer

• EXPStudio Bandwidth Monitor 1.0
  Run as system service on your Windows NT, 2000, 2003 and XP that monitors network traffic, CPU, and memory usage in real time via browser. Doesn't take a lot of system resource.

• PA Server Monitor 4.0
  PA Server Monitor is a Windows service that monitors the health and availability of Windows servers, network services (on Windows, Linux and other operating systems), and devices

• 10-Strike LANState 6.52
  Monitor network hosts, shared resources, and traffic, get MAC addresses, scan TCP and UDP ports, and be notified when devices turn on or go down. Create network diagram and see your network's state in visual form at any time. The program includes a number of features for administrators such as sending messages, shutting down and turning on remote...

• Simple Bandwidth Monitor 1.0
  Simple Bandwidth Monitor application was designed to be an efficient tool that will help you monitor your network usage

• ReaSoft Network Firewall 2.5
  ReaSoft Network Firewall is a new generation corporate gateway firewall which protect the network from external and internal attacks, provides Internet access to users and offers enhanced traffic control features. The program is designed for small...

• WanSpy 1.
  Introduction to WanSpy Today’s computer networks doesn’t just confined to LAN, it is distributed over wide area across building, cities and countries through WAN Link