Recover data from a broken RAID Level 5 or 0 Array.
Runtime's RAID Reconstructor will help you to recover data from a broken RAID Level 5 Array consisting of 3 to 14 drives, RAID Level 0 Array (Striping) consisting of 2 drives.

Even if you do not know the RAID parameters, such as drive order, block size and direction of rotation, RAID Reconstructor will analyze your drives and determine the correct values. You will then be able to create a copy of the reconstructed RAID in a virtual image, an image file, or on a physical drive.

Once you created an image you can use it for further data recovery processing with Runtime's GetDataBack. If you create the image on another physical drive, you can process it with GetDataBack too or you might even be able to directly boot from it.

RAID Reconstructor is read-only. It will not try to fix your RAID. It will merely create a copy of your RAID at another location. It will collect sector by sector from each single drive involved and write these sectors in the correct order to the designated destination. This process is also called de-striping.

Because one drive is redundant in RAID 5, it is sufficient to have one less than the original number of drives (N) in the array. RAID Reconstructor can recalculate the original data from the N-1 drives. For a RAID-0 (striped) array you will need both drives.

The RAID Reconstructor will recover both, hardware and software RAIDs. It will recover from broken Windows Dynamic Disk sets.

• Getway Raid Recovery 2.1
  Getway Raid Recovery can extract data from multiple Hard disks in a RAID system, and rebuild the correct data. It can get data back from various types of array, including RAID 0,...

• Raid 2 Raid 1.0
  Unlock your native RAID array! Stop depending on the system board chipset to support your RAID configuration! Mount RAID arrays and Dynamic Disks created with all current Intel, nVidia or VIA chipsets on any other chipset and on all versions of Windows with free Raid 2 Raid software

• RAID Recovery for Windows 1.00
  RAID Recovery for Windows recovers the entire content of your broken RAID within minutes. You will be able to copy the files and folders over to another disk. RAID Recovery for Windows works for NTFS-formatted RAID-0 or RAID-5 configurations. It...

• DiskInternals Raid Recovery 1.7
  Recover corrupted RAID arrays in a fully automatic mode

• Quick Recovery for RAID-5 10.x
  RAID-5 Data Recovery, Disk Recovery Software for RAID-5, Data Recovery Software RAID-5, RAID File Data Recovery Software, Best RAID-5 Data Recovery Software, Free RAID-5 Data Recovery Software. Quick Recovery RAID is a do-it-yourself Non-Destructive Raid Data Recovery Software. There are just two steps to perform the complete operation. Analysis,...

• FILERECOVERY Professional 2009 (PC) 4.5
  FILERECOVERY Professional scans and finds lost partitions, boot sectors and other file system components

• Captain Nemo Pro 5.01
  Access Novell, NTFS and Linux drives or images from any Windows Computer Widely used by law enforcement personnel, forensic investigators as well as network administrators. Captain Nemo enables you to access any Novell, NTFS, or Linux...

• R3CoverWin 4.5.0.1
  R3Cover Data Recovery Software scans and finds lost partitions, boot sectors and other file system components

• 321Soft Data Recovery for Mac 5.0.0
  321Soft Data Recovery is a full featured, complete data recovery solution for Mac OS X that is designed to recover lost, formatted and deleted files from hard drives, USB flash...

• iRecover 4.0
  iRecover offers support for all major file systems: FAT, FAT32, NTFS (all versions) and Linux Ext2/3/4