eCOUNT is a wireless software application that uses computers and hardwired or wireless RF technology to count target hits. It runs on a Windows 95/98/Me/2000/NT4.0/XP PC. The RF transmitter has a working range of well over 350+ feet. There can be either single or dual display's allowing one or two competitor's to compete. The transmitter comes with a normally open sensor and magnet. As a target is hit the sensor will close and transmit a hit. The transmitter can also be connect to a relay that performs open and close. To connect the transmitter to a relay you would need to remove the NO sensor and connect the two ends directly to a relay. If you are NT, 2000 or XP you must delete any printer driver associated with LPT1 or LPT2 depending on which port you use. Failure to do so will result in unpredictable results. eCOUNT comes with a database for teams and users. You can display and export competition data.

• eTIMER 3.0.0
  eTIMER is a software application that counts, times and measure just about any athletic event or drills. eTIMER is available for Windows 95, 98, NT4.0/2000 and XP. eTIMER is...

• eCLOCK 3.0.0
  eClock is wireless game or event clock that runs on a Windows 95/98/Me/2000/NT4

• TIMER(pulses in seconds) 4.0.0
  Timer is the perfect timing software to control hydroponics, relays, solenoids or lights from a computers printer port. This program enables the PC to connect to the outside world by using the printer port LPT1. Hardware can then be connected to the...

• ManageEngine WiFi Manager 5.6
  WiFi Manager is a combined WLAN security and management software for 802

• ReMapPro - COM port utility 3.1
  The main utility, the Comport, is included in the ReMapPro package makes serial (RS232) data from your PC available on TCP/IP-based networks and makes TCP/IP data available on serial ports on your PC. This makes it possible for any other computer on the same network to send and receive serial data through a remote serial port on the PC where the...