SwitchCop shows:
General Information about Switch: Information like Switch name, its up time, mac address, port count, contact person name etc.

Basic Bridging Information: It includes generic info about every port that is associated with this Switch, and filtering information configured into the Switch by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific destination addresses are allowed to be forwarded.

Spanning Tree Protocol Information: If your Switch supports Spanning Tree Protocol than you can view information like protocol specification, time since topology change, path cost etc.

Transparent Bridging Information: If the bridging is of transparent type than information about every port that is associated with this transparent bridge (MaxInfo, InFrames, OutFrames, and InDiscards) can be seen.

VLan Information: In case VLan is configured on your network VLan Information show you VLan Version, Active VLans, VLan Index, Name, Ports associated with the VLans etc.

Port Information*: It includes port index, its type, sub type, and address.

Interface's details: Details about the interface of the Switch like their description, speed and status.
Facilitates Reporting (i.e. printing of important information is supported).
Switch Cop enables you to take Backup of important information in two formats, Text Format and MS Excel Sheet Format.

Graphs:

Switch Cop Display different Interface Traffic Graphs for:
Incoming Octets Vs Outgoing Octets.

Inbound packets that contained errors Vs Outbound packets that could not be transmitted because of errors, on the specified Interface.
______________________________
Usage:
Manage and Monitor Ethernet Switch.

Report generation of important

information for Audit/Inventory purpose.

• SwitchInspector 1.3.1
  SwitchInspector is an easy to use application that assists you with the design, validation and auditing of your Local Area Network. SwitchInspector provides an easy and effective...

• Managed Switch Port Mapping Tool 1.99.7
  The Managed Switch Port Mapping tool is a program that communicates with a managed ethernet switch using SNMPv1/v2c and maps the physical port connections to MAC and IP addresses of the attached devices

• Neb 1.1
  Neb is intended for automatic generation of network maps on the interface level. The software creates the map that shows which routers and switches opearate in the network and which physical interfaces they use to communicate. Neb allows you to:...

• Switchwatch 1.1
  Its all quite simple really

• AdventNet ManageEngine OpUtils 5.6
  OpUtils offers the ability to map your Switch Ports to devices to its physical location. It automatically retrieves the VLAN details and can be run at scheduled interval. The IP Address Manager tool automatically discovers the subnets from the routing tables and scan them periodically to get the details of Used & Available IP Address in your...

• Switch Center Workgroup 1.8.1
  Switch Center is network management and monitoring software for managed switches and hubs from any vendor supporting SNMP BRIDGE-MIB that helps to discover, monitor, mapping and analyzing networks topology, connectivity and performance

• Switch Center Enterprise 1.3
  Switch Center is network management and monitoring software for managed switches and hubs from any vendor supporting SNMP BRIDGE-MIB that helps to discover, monitor, mapping and analyzing networks topology, connectivity and performance. The...

• AdressWizard Pro 4.22
  The RzK AddressWizard is an intelligent IP-address scanner with SNMP, Wake on LAN, Port scanning and Intrusion Prevention